-
Recent Posts
Tags
Archives
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- August 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- September 2010
- June 2010
- May 2010
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- November 2007
- October 2007
Meta
Tag Archives: Netduino
FEZ XBee Sensor: Hat Trick
As mentioned at the end of my Watching the Watcher article, the Netduino Plant Light project is going to take a sharp turn at this point, losing both the Netduino and the Plant Light. I’m going to spin off some … Continue reading
Posted in .Net, Electronics, Programming
Tagged .Net, Electronics, FEZ, Netduino, nimbits, Pachube, Python
Leave a comment
Netduino: Watching the Watcher
Note: This article is an installment in a series about building a plant light controller (and beyond) on the Netduino microcontroller platform. For previous articles in the series, click here. It’s been a few months now since the Netduino in this … Continue reading
Netduino Meets World
[Updated August 6: Added a couple of tips to the section on using minicom to configure the XBee.] [Updated August 7: Added "Windows Weirdness" section with workarounds for problems with pySerial on Windows] Note: This article is an installment in … Continue reading
Posted in .Net, Electronics, Programming
Tagged .Net, Beagleboard, Electronics, Linux, Netduino, Python
Leave a comment
Netduino: A Little Help From Its Friends
Note: This article is an installment in a series about building a plant light controller (and beyond) on the Netduino microcontroller platform. For previous articles in the series, click here. If you’ve made the switch to programming with .Net Micro … Continue reading
Netduino: Ordering Off the Menu
The source code for this article can be downloaded here: LightControllerWithMenu.zip. This is the 5th in a series of projects for the Netduino and Seeed Studio’s Grove Starter Bundle. The first four articles in the series were: Netduino Enters the … Continue reading
Netduino: Here Comes The Night
This is the 4th in a series of projects for the Netduino and Seeed Studio’s Grove Starter Bundle. The first three articles in the series were: Netduino Enters the Grove Netduino: Time and Weather Netduino: Let There Be Light As … Continue reading
Netduino: Let There Be Light
This is the 3rd in a series of projects for the Netduino and Seeed Studio’s Grove Starter Bundle. This installment is intended to create a plant light that automatically switches on and off at a pre-set time of the day … Continue reading
Netduino and Analog Input: Look Ma, No Breadboard!
If you carefully compare the photos in my first and second posts about the Netduino, you may have noticed a couple of things: Before – After – There is no longer a mass of wires on the breadboard connecting the … Continue reading
Netduino: Time and Weather
Note: The source code for the project described in this post can be downloaded here. This post is a continuation of my “Netduino Enters the Grove” article. Building on the project in that post, I’m going to make the … Continue reading
Netduino Enters the Grove
Note: The source code for the temperature LCD program described in this article can be downloaded here. I recently received one of Seeed Studio’s new Grove Starter Bundles. Since many others will put GROVE through its paces using an Arduino … Continue reading